M10 silicon oxynitride process andhalfcell multi-busbar technology areusedtoimprove the opticalutilization,and theconversionefficiency is up to 21.2%.
The series parallel design reduces the series resistance RS and reducesinternal electrical performance losses.
Strict quality control and TUV Rheinland,CE,CTC testing certification ensure higher module reliability.
All black design,moreharm onious and beautifulappli-cation scenarios.
ISO 9001
ISO 14001
ISO 45001
IEC 61215
IEC 61730
Quality Assurance
Power Guarantee
Annual Decay
Cell | PERC P-type PERC (156) |
Dimensions | 2465±2mmx1134±2mmx30±1mm |
Weight | 29.1 kg±3% |
Glass | 3.2mm AR coating tempered glass, low iron |
Frame | Anodized aluminium alloy |
junctionbox | IP68, 3 diodes |
Wireway | 4mm², 350mm(+)/350mm(-) or Customized Length |
Packaging | 36pieces/pallet |
Loadingquantity | 40 HC/: 720pieces, 13 meter truck: 720pieces, 17.5 meter truck: 864pieces |
Maxsystem voltage | 1500V DC |
-OT | -40°C~+85°C |
Fuse's rated current | 25A |
Maxload,front | 5400Pa |
Maxload,back | 2400Pa |
-NOCT | 45±2°C |
Backside rate | 80%±5°C |
safety level | Class Ⅱ |
Fire performance | UL Type Ⅰ |
Model | JKL108-B-400MH | JKL108-B-405MH | JKL108-B-410MH | JKL108-B-415MH | |||||||||
STC/NOCT |
|
|
|
| |||||||||
Pmax [W] |
|
|
|
| |||||||||
Vmp [V] |
|
|
|
| |||||||||
Imp [A] |
|
|
|
| |||||||||
Voc [V] |
|
|
|
| |||||||||
Isc [A] |
|
|
|
| |||||||||
EFF [%] | 20.48% | 20.74% | 21.00% | 21.25% | |||||||||
Powertolerance (w) | 0~+5W | ||||||||||||
Short circuit current temperature coefficient (a_lsc) | +0.051%/℃ | ||||||||||||
Open circuit voltage temperature coefficient (B-Voc) | -0.260%/°C | ||||||||||||
Maximum power temperature coefficient (y_Pmp) | -0.340%/°C | ||||||||||||
Standard test conditions(STc) | lrradiance 1000W/m²,Cell temperature 25°C,Spectral AM1.5 | ||||||||||||
Nominal battery operating temperature (NOCT) | lrradiance 800W/m², Ambient temperature 20℃, Spectrum AM1.5, Wind speed 1m/s |
Note: The electrical performance parameters in this product catalog do not only refer to a single module, nor are they promised in the contract. The electrical parameters are only used for comparison between different module types.